|
Booms and Accessories
Booms: ATV Boom System 6ft.-12ft.
The
ATV Boom System (6 ft. to 12 ft.) is designed for spraying vineyards, orchards,
curbs, gutters, sidewalks and other areas with 6’ wide clearance.
The boom has breakaway and folding hinges. It is mounted further forward
to allow space for the breakaway/folding hinge (see diagram). The boom
is mounted on the front utility rack and is available single-sided or
double-sided. The plastic hoods have flexible rubber boots on the end
to protect vines, trees, stakes or posts. One (1), two (2), or three (3)
sensors can be mounted under each hood to spray 12", 24", or
36".
 The
complete ATV WeedSeeker® spray system includes a WeedSeeker® kit
for desired spray width, an ATV tank, pump kit, and a boom. The WeedSeeker®
kit includes sensor or sensors, controller and associated cables. Parts
are purchased separately to make a complete system. Various components
can also be purchased separately and added to an existing system.
The ATV Boom System is shipped unassembled . Support tools are provided
to help dealers and users install and operate WeedSeeker® systems.
A WeedSeeker® Dealer or NTech Industries, Inc. can discuss with you how a system
can be mounted on your particular ATV.
Booms: Front Mount Utility Vehicle System 6ft.-12ft.
The
Gator Boom System is designed for spraying vineyards, orchards, curbs and
gutters, sidewalks and other areas. It is mounted to the front bumper
and is available single-sided or double-sided. The boom has breakaway
and folding hinges. The plastic hoods have flexible rubber boots on the
end to protect vines, trees, stakes or posts. The boom is available for
spray widths of 6’ to 12’. One (1), two (2), or three (3) sensors
can be mounted under each hoods to spray 12", 24", or 36".
 The
complete Utility Vehicle WeedSeeker® spray system includes a WeedSeeker®
kit for desired spray width, a utility tank, pump kit, and a boom. The WeedSeeker®
kit includes sensor (or sensors), controller and associated cables. Parts
are purchase separately to make a complete system. Various components
can also be purchased separately and added to an existing system.
The Utility Vehicle Boom System is shipped unassembled. Support tools
are provided to help dealers and users install and operate WeedSeeker®
systems. A WeedSeeker® Dealer or NTech Industries, Inc. can discuss with you
how a system can be mounted on your particular utility vehicle.
Booms: Rear Mount Utility Vehicle Boom System
The
Utility Vehicle Tank and Boom System can be mounted on a variety of utility
vehicles including John Deere Gators and Kawasaki Mules. These systems
are used to spray runways, streets, parking lots, or other areas. The
system is mounted by bolting the skids to the bed of the vehicle. The
boom is attached behind the vehicle to the bed mounted skids or front
mounted to the bumper. The booms accommodate 8 to 16 sensors and are either
rigid or folding with breakaway hinges. Shields are mounted on the folding
portions to the end of the boom to protect the sensors.
 The
complete Utility Vehicle WeedSeeker® spray system includes a WeedSeeker®
kit for desired spray width, a utility tank, pump kit, and a boom. The WeedSeeker®
kit includes a sensor (or sensors), controller and associated cables. Various
components can also be purchased separately and added to an existing system.
The Utility Vehicle Boom System is shipped unassembled. Support tools
are provided to help dealers and users install and operate WeedSeeker®
systems. A WeedSeeker® Dealer or NTech Industries, Inc. can discuss with you
how a system can be mounted on your particular utility vehicle.
Booms: Truck Mount Boom System
Truck
Mount Booms are mounted on the rear of the truck to spray roads, shoulders,
parking lots or other areas. They are available as receiver hitch mounts
or as skid mounts. The receiver hitch mount fits a standard receiver hitch.
The skid mount has two vertical hangers for mounting. Two rows of bolt
holes on the hangers allow the boom to be moved up or down 17 inches.
Up to 9 sensors can be mounted on the boom. Ten feet of road width can
be sprayed using the nine sensors at various angles. Utility tanks and
pumps can be added to complete the system.
The
complete Truck Mount Boom System with WeedSeeker® spray system includes
a boom, WeedSeeker® kit for desired spray width and utility tank/
pump kit. The WeedSeeker® kit includes sensor (or sensors), controller
and associated cables. Parts are purchased separately to make a complete
system. Various components can also be purchased separately and added
to an existing system.
The Truck Mount Boom System is shipped unassembled. Support tools are
provided to help dealers and users install and operate WeedSeeker®
systems. A WeedSeeker® Dealer or NTech Industries, Inc. can discuss with you
how a system can be mounted on your particular truck.
|
|
|
